Style A - Embedment T/C Assembly

Style A – Embedment T/C Assembly

1. Case Style

Select One:

Case A – 0.250″ L, 0.275 Ø
Case B – 0.250″ L, 0.188 Ø, 0.250 Ø Flange
Case C – 0.300″ L, 0.125 Ø
Case D – 0.250″ L, 0.250 Ø

Select from one of the four Case Style options based on application requirements for size and mounting.

2. Calibration

Select One:

Maximum temperature limits for each ANSI type thermocouple materials are given (see “more info” button), however these will vary depending on sheath materials, application atmospheres, wire gauge size, insulating materials and epoxy composition.

3. Junction

Tip Style:		Tip Styles: The application dictates the choice. e.g. Fast response time = Exposed Tip. (G)- TC measuring junction is one with the sheath so they have the same electrical potential. (U) – TC measuring junction is insulated from the sheath to eliminate outside electrical interference.
Type:

4. Element Type

Select One:

Up to three separate thermocouples in a single sheath. Separate ungrounded junctions can be wired to different instruments.

5. Sheath Material

Select One:

The application dictates the choice of sheath materials. 304SS and 316SS are most commonly used but temperatures and corrosive conditions can necessitate the use of other materials.

6. Babbitt Tip

Select One:

Select whether a Babbitt Tip is required for bearing temperature monitoring applications.

7. Leadwire Construction

Material:		Know the application atmosphere and limitations – temperature, moisture, corrosion and abrasion. Flexible wire is available in solid or stranded conductors with many sizes (gauge), insulations and calibrations to meet nearly all applications.
Configuration:

8. Leadwire Gauge

Select One:

Insulated wire, solid or stranded, in a variety of insulations is carried in the most common sizes from 16 to 24 gauge.

9. Leadwire Length “A”

Enter Inches:

There is no limit to the leadwire length however when the distance to the instruments is 150 feet or more a 4-20ma signal conditioner is recommended.

10. Leadwire Terminations

Select One:

The type of termination selected may be restricted by the wire gauge.

11. Split Length “E”

Enter Inches:

Specify the length of the split leads, if applicable, to meet connection requirements.

12. Special Options

N	None	X	X-ray Junction
A	Special Limits of Error	Y	Certificate of Conformance
G	Shielded Leadwire	2	High Temp Oxidation Coating
L	Mating Connector	3	Test at Process Temp
O	Seperate Ungrounded	4	BX Connector
Q	Individual Leadwires (3/8″ Strip std)	Z	Special